Steering Components

 Online Order Form and Prices are at Bottom of Page

NOW!!   GET THE BEST FOR LESS!!!

Wanna 'wheel tough, twisty trails? Then you're gonna need to convert to crossover steering. And A.O.R. is proud to offer the best, burliest parts on the planet! 

For more info on the whys and wherefores of Crossover Steering, please see Can I use my stock steering with 5-inch springs? on our FAQs Page.

Extreme Duty Adjustable Drop Drag Link #S7247

If your 'wheeling isn't too twisty, you may opt to keep the stock front-to-back steering setup. But you'll certainly need this extreme duty Adjustable Drop Drag Link to restore favorable steering geometry in suspension lifts up to 5 inches. 

Adjustable Drop Torque Arm #R1902

If your lifted Toy is your daily driver, too, then you may experience excessive brake-steer effects on the street without the stock torque arm (which had to be removed to lift the suspension.)  That's why A.O.R. offers this 4-inch-drop adjustable torque arm. You can use it to eliminate brake-steer in lifts up to 5 inches. The kit includes top-quality Heim joint, bushings and all necessary hardware. 

A.O.R. is very proud to offer NEW LOW PRICES on O.T.T. Industries' Awesome "Over the Top" Crossover Steering System!

      This is the ultra-bombproof setup that puts both the tie-rod and drag link above the springs and out of harm's way! Fits all solid-axle Toy trucks, 4Runners and conversions*. 

      Kit #OTTXOC offers clearance for the axle to be moved up to 3-1/2 inches forward.  OTTXOC is supplied with everything shown above including extreme-duty milled billet steering arms, massive 1-1/2"-diameter, .375-wall D.O.M.drag link and tie rod, new billet pitman arm and heavy-duty Ford greaseable tie-rod ends. 

Components are also available separately.

 Here's the new CNC'd billet pitman arm!

*NOTE: You'll need an '86-'95 Toy 4x4 steering box to make this Over The Top Crossover Steering System work (same as with any x/o steering.)

O.T.T. Industries' Toy steering arms are milled from highest quality billet steel. The pins are CNC machined from 4140 Chromoly steel. Mounting holes are precisely tapered to accept factory Toy taper cones. It just doesn't get any tougher than this! And you can buy just the steering arms (by the pair) if you want to build your own crossover steering kit.

 "Stubby" steering arms and Stubby Pitman arms are now available.  They're designed to allow you to move the front axle waaaay forward!  

A.O.R. supplies heavy-duty Ford greaseable tie-rod ends like these with O.T.T. kits.