A.O.R. BONZ^TM shackles for Tacomas and T100s are beyond beefy! All BONZ^TM are CNC Plasma-cut from 2" x 3/8" hot-rolled steel and gold-zinc electro-plated for rust resistance. Sold per pair.  Available with greasable or standard (non-greasable) bolts and locking nuts.  Order online below.

No Doubt, Tacomas and T100s are great trucks.  BUT there's also no doubt that their stock rear suspensions could use a little help, to say the very least! 

A.O.R. specializes in exactly the right custom Toyota suspension parts you'll need, whether you're keeping stock height and just want better ride performance or if you're creating a super-flex rock crawler.  All our springs are custom built to your specific needs, so give us a call at 970-263-4300 for all the info!  And Click HERE for more details on our famous Orbit-Eye^TM Springs.

ABOVE:  A.O.R.'s Orbit-Eye^TM Springs and BONZ shackle in action.  The Orbit-Eye's pivot action increases axle articulation (wheel travel), reduces twist-induced stress on the spring and saves bushings, too.  

Features Include: 

* World-famous Bilstein high gas pressure monotube shock absorber technology.  

* Patented Digressive, split valving. 

 * 0"-'2 ride height adjustable threaded Zinc plated shock body with feature progressive-rate 2.5-inch Hypercoil springs.    

* Billet upper mount stem conversion allows shock to articulate throughout entire suspension travel without spring bind.

* 5100 Series rear shocks available with matched valving.

King Shock 2 ½" Tacoma and Tundra Bolt-on shocks are easy to install with precision fit and ultra durability.

Check out these awesome race-bred features!

· Billet 6061 T-6 machined aluminum parts
· Fully threaded seamless steel cylinder O.D. for coil overs
· Billet top spring preload adjuster nut to raise or lower ride height
· Large 7/8" diameter shaft - hard chrome plated for strength

Order online below.

· Honed and polished bores
· 5/8" teflon lined spherical bearings
· External reservoir for easy mounting
· Heat treated stainless steel alloy valving designed for extreme temperatures
· Dual spring rates for custom specs
· Self adjusting valving/washer system on piston
· Custom valving available for each specific application
· Completely rebuildable and revalvable
· $850.00 per pair
· Internal reservoir for easy mounting

Order online below.

Want a wider stance? Need to add clearance for steering, brakes or shocks?  

We've got the burliest steel wheel spacers on the planet!  

A.O.R.'s super-tough spacers are machined from 1-1/16-inch or 1-1/2-inch STEEL and gold-zinc plated for rust resistance. Ridiculously simple installation: Just bolt the spacers onto your existing wheel studs using the open-end nuts provided. Then bolt your wheels onto the spacers' studs using your existing lug nuts. 

Order your Wheel Spacers online below.

U-Bolt Flip Kits are available for all years rear springs up to current Tacomas, T-100s and Tundras, and for '79-'85 fronts.

Order online below. 

Note:  Driver-side Front U-Bolt Flip kit works with crossover steering only. 

A.O.R.'s Braided-Stainless Brake Line Kit includes two 12-inch lines for the front and one 18-incer for the rear, all made of burly Dash 4-size braided stainless steel--most aftermarket lines are smaller dash 3.

The complete kit (similar to the one pictured above) includes all the fittings and keepers you'll need.  Individual replacement lines are also available.  Carry spares for trail fixes!

Order online below.

A.O.R. U-Bolt Flip Kits are available with or without polyurethane bumpstops. 

The poly bumpstops are 1 3/4" tall and pyramid up from a 1 3/4" x 3" base. 

Click HERE to see photo-illustrated U-Bolt Flip Kit installation directions.

2" and 3" Body Lift Systems feature reinforced nylon lift blocks and heavy-duty hardware. 

All the brackets, extended bolts, miscellaneous hardware and instructions you'll need are included.   It's the right stuff for tough trails!

Order online below.

Electric Locker Skid Plate

This tough 1/4" steel skid plate protects Toyota electric lockers, whether they're in their stock locations or retrofitted into front or rear solid axles. It fits both high pinion and V6 differentials, as well as Tacoma axles. No modifications are needed -- it simply bolts on using the factory hardware! Nice to know that when you get a little "off the line," there's a skidplate protecting the motor housing on your electric locker!

Order online below.

Get your unbeatable ARB products right here!!  We offer great prices on the Air Lockers and compressors you need to make your Taco or t100 unstoppable.  AND we've got the famous Safari Snorkel if you wanna be unstoppable in the water, too.  And how about a burly Bull Bar to mount your winch? 

Check out the new Tacoma fiberglass front fenders. The Bubble Flare design features a 2-inch bulge and still retain stock body lines. NOTE:  A.O.R.'s fiberglass fenders are all precision-molded.  However, they do not come with mounting holes pre-drilled.  You will have to drill holes.  And you may need to trim or sand edges or openings for best fit.  All fiberglass body panels feature top-quality hand laid, 3-oz mat with a cloth layer for extra strength and toughness.  Hey, this is the same stuff desert racers use!  Fiberglass hoods are available with 2-pin or 4-pin attachment. 2-pin versions utilize your stock hood hinges. Precision cut-outs in the fenders allow hassle-free light mounting.

Order Tacoma fiberglass online below.  Call 970-263-4300 for T100 and Tundra fiberglass.

Wanna see more of Randy's (AOR's Sales Manager) trippin'dicular Tacoma prerunner?  Click HERE

NOTE: Prices subject to change without notice and protective packaging and shipping are extra. Click How to Order for details.